Exothermic Chemical Foaming Agents
Bergen International manufactures a wide range of exothermic CFAs for molding and extrusion applications.
| Agent | Recommendations | Applications |
| Foamazol™ 14 | Intended for use in foamed rotational molding applications. | Molding |
| Foamazol™ 15 | Intended for use in foamed rotational molding applications. | Molding |
| Foamazol™ 16 | Intended for use in foamed rotational molding applications. | Molding |
| Foamazol™ 80 | Recommended for applications requiring a high gas yield. | Extrusion |
| Foamazol™ 81 | Recommended for applications requiring a high gas yield. | Extrusion |
| Foamazol™ 85 | Recommended for applications in polystyrene that require high gas pressure. | Molding & Extrusion |
| Foamazol™ 86 | Intended for extrusion and molding applications where lower processing temperature are used. | Molding & Extrusion |
| Foamazol™ 87 | Recommended for wire and cable applications such as coaxial cable. | Extrusion |
| Foamazol™ 88 | Recommended for applications requiring a high gas yield. | Extrusion |
| Foamazol™ 89 | Intended for extrusion applications requiring good gas yields without screw plate out. | Extrusion |
| Foamazol™ 810 | Intended for extrusion applications requiring good gas yields. | Extrusion |
| Foamazol™ 811 | Intended for extrusion and molding applications where lower processing temperature are used. | Molding & Extrusion |
| Foamazol™ 812 | Recommended for ABS pipe and other profile extrusions. | Extrusion |
| Foamazol™ 814 | Recommended for applications requiring a high gas yield. | Extrusion |
| Foamazol™ 816 | Intended for use in foamed profile extrusion applications requiring significant density reductions, obtained through controlled gas yields. | Extrusion |
| Foamazol™ 1001 | Intended for sink mark removal and warp reduction in injection molding applications. | Molding & Extrusion |
| Foamazol™ 1002 | Intended for sink mark removal and warp reduction in injection molding applications. | Molding & Extrusion |